Paid for by: Mugging Carolers and stealing from Santa
KGB Presents: readme
Editors-in-Chief: Eshaan Joshi, Greeshma Adiga
All the news unfit to print!
Pitch meetings Sat 5:00 pm, DH-1211

The winter coat of the future

We have a most pernicious issue on our hands every winter: every winter coat is insufficient. Those cool leather jackets that you can wear during the summer and autumn are woefully inadequate for keeping our ribs unfrozen. Windbreakers do not work as their name suggests and do not, in fact, give you superpowers. And those heavy parkas do a great job of triggering the onset of five gallons of sweat the moment you step indoors. And worst of all, none of these coats transmit enough carbon monoxide to that smelly guy eating a Protein Power Wrap from ABP sitting next to you in CS lecture (even worse if they are wearing shorts in cold weather).

At least, not until now. Because in the past three months, a rogue faction of the CMU Fashion Club has invented not one, but two ultimate winter coats. Best of all, the patent is public, meaning even YOU, a dude without an engineering degree (or maybe you do, not judging), can create the coat from scratch. You’ll never have to worry about frostbite again. For the first design, you will procure either a 28­ounce can of propane, a 500 mL container of isopropyl alcohol, or another carbon­-based fuel supply. Attach a fuel line to the opening (or create one yourself; don’t be scared and don’t get dirty thoughts) and connect it to a 4-­stroke combustion engine with a fan attachment.

Then, attach a bunch of miscellaneous USB­C cords and wires to the engine and onto an LED display that has an outlet for a power supply. Glue or tape everything together, then attach it to a custom wire frame that can rest on your shoulders. Finally, add an exhaust pipe that doubles as your left sleeve, and what you’re left with is a functional and energy-­efficient winter coat that also allows you to cast clouds of carbon monoxide like you’re Gandalf.

The second design is significantly lighter but at the cost of having little to no emissions whatsoever. Instead of the carbon­ based fuel source, acquire some 3 mm diameter tungsten filaments, a large quartz envelope, and lots of nichrome resistance wire. The rest of the materials follow from the first design, and what you’re left with is a breezy coat that has about 97% heat efficiency and is also 5 pounds lighter. If you want to get rid of even more weight, consider ditching the DHT11 sensor for temperature control and use a screwdriver to turn the heat all the way up.